Monitor Entering Power Saving Mode (Try This Fix First!)

Posted on

The power-saving mode on your computer is designed to protect your monitor from screen burn when kept idle for a certain period of time. Not only does this feature help you conserve energy, but it also protects your monitor from permanent screen damage.

The power-saving feature comes with a fair share of pros and cons, as some users find it beneficial while others might find it annoying. To fix the monitor entering the power-saving mode, follow the guide below.

Why Does My Monitor Enter Power-Saving Mode When Turned On? 

If your monitor goes into power-saving mode every time you turn it on, then there is something wrong with the video source. This monitor feature cannot be controlled using an application or operating system as it can sense the issue in the video source.

So, if the monitor of your computer entering power save mode on startup, it’s mainly due to the following:

  1. Cables Are Not Connected Properly: The wires between your KVM switch and your computer are a bit loose. So, whenever you switch on your PC, your monitor will not get proper video signals from this switch.
  2. Malfunctioning Devices: Your monitor fails to receive video signals due to a broken or malfunctioning cable, external video adapter, motherboard video port, video card, or other devices connected to it.
  3. Disconnected Cable: The wire connecting to your monitor is either loose at one end or has been cut off at both ends. 

How to Stop Your Monitor from Entering Power-Saving Mode

You can keep your monitor from going into power-saving mode by disabling the screen saver on your computer. Once the screen saver is disabled, you can use your computer without any fuss. Below, we’ve listed some methods to fix this problem. 

  1. Go to settings and tap on “System“.Opening Window SettingsOpen System Menu
  2. Now, tap on “Battery” on the left-hand menu. Open Power And Sleep Settings
  3. Open the “Power & Sleep Settings” in the Battery menu. Changing Power And Sleep Settings
  4. You’ll find “Screen” and “Sleep” options, and you have to choose “Never” for every option featured under them. 

Viola! Now you know how to fix the monitor entering power save mode. You can choose from a range of time frames, such as 30 minutes to five hours. If you’re still experiencing the “monitor entering power-saving mode” issue, you should consider updating outdated drivers and checking your battery settings.

Follow the steps to change the power plan of your monitor:

  1. Open the Control Panel, and go to “Hardware and Sound“.Open Control PanelOpen Hardware And Sound
  2. Now, select “Edit Power Plan” under the Power options. Open Edit Power Plan
  3. There, you need to change the settings and select “Never” for every option.Update Power Plan
  4. Tap on “Save changes“, and you’re done. 

You can also prolong the time taken by your computer to switch into power-saving mode by selecting a time frame ranging between 30 seconds and five hours.

I set it to “Never” just so I wouldn’t be bothered with monitor power saving mode or display turning off suddenly. And if you’re like me, then you should do this as well.

Steps to Fix Monitor Entering Power Save Mode On Startups

If your monitor keeps entering power-saving mode right after you turn on your computer, it may be due to a damaged motherboard battery. You’ll have to install a new motherboard battery to resolve this problem.

Before you replace the motherboard battery, ensure that the video cables are connected to the correct port, that the RAM is working properly, and that the CMOS has been set to the correct configuration. Here’s how to replace a damaged motherboard battery:

  • First, disconnect all cables attached to your computer, apart from the power cable. 
  • Now, take out the power cable, and then hit the “Power” button featured at the front of the computer. 
  • Unscrew all the screws on the computer’s back and remove the top tray by sliding it towards yourself.
  • Take out the battery that looks like a bigger version of the ones found in watches. Ensure you mark the front side of the battery to avoid any confusion. Now, replace the battery with a new one with similar specifications to the original. Replacing Motherboard Battery
  • Pay attention to the battery orientation while installing it, as improper installation could cause explosions. 
  • Now, slide the top tray back to its original position and tighten the screws. Connect all the cables to your computer, and you’re done. 

This should resolve the “monitor entering power-saving mode on startup” issue. 

How to Fix the “Computer Is Stuck in Power-Saving Mode and Won’t Turn On”

Sometimes your computer might get stuck while running in power-saving mode and won’t switch on due to changes in its configuration. This issue might arise due to an error in its original configuration or a corrupted driver

Here’s how to fix this issue quickly:

  • First, shut down and restart your computer. When you do it, keep hitting the F8 key until you enter safe mode
  • Now, choose the “Last Known Good Configuration” option present on the screen. 
  • Click on the “Apply” button and reboot your computer to see if the issue is resolved. 

Frequently Asked Questions

Frequently Asked Questions

Why Is the Monitor Entering Power Save Mode?

A monitor may enter a power-saving mode for a variety of reasons, such as a problem with your window display settings or if you leave it idle for a few minutes. Although a monitor going into power-saving mode has the sole purpose of conserving energy. It does not affect the performance of your monitor, but it does affect all other components on your computer. So, if your monitor keeps entering the power-saving mode, try troubleshooting this error.

Is Power Saving Mode Good for the Monitor?

The power-saving feature is good for your monitor as it helps you save energy. Although it’s not an efficient way, this feature does reduce the power consumed by LCDs. You can save a lot of energy if you use your monitor for longer. However, this feature has one downside: it makes switching on/off your monitor a bit annoying, especially when you’re in a hurry. That means your monitor will take a while to turn on and off.

The Bottom Line

If you keep on experiencing the “monitor entering power-saving mode” error on your computer, don’t worry! There are quick fixes you can try to resolve this issue in no time, such as:

  • Changing Power and Sleep Settings to “Never”.
  • Edit the power plan and set it to “Never”.

Hopefully, this guide has helped you in every way possible to stop your monitor from entering the power saver mode. Were you able to stop your monitor from entering power-saving mode? If so, share your experience in the comments below!

Leave a Reply

Your email address will not be published. Required fields are marked *